Tag Archives: rubber powder making machine

Good Tire Recycling Machine Suppliers Rubber Powder Making Machine Waste Tire Scrap Recycling Machine

Good Tire Recycling Machine Suppliers   Rubber Powder Making Machine   Waste Tire Scrap Recycling Machine

Automatic tire recycling EPT/tyre shredEPTEPT

Tire debeader

The very first stage in tire recycling procession
Weighty duty body
Hooks and cross pulling die produced of 45# metal, tempered and quenched
Geared up with safety body keeping away from the hazards during doing work
Two series: Hydraulic one and mechanic one
Simple to run and modify spare parts (hooks and cross pulling die)
Tire cutter

Chopping tires into items before shredding
Tiny tire parts are less difficult to procedure in shredder
Knives produced of YG-20 metal, EPT using time
Hydraulic handle
1 clamping cylinEPTand a single slicing cylinder
Equipped with a roller platform to process large tires
Tire shredder

The higher-ability shredEPTwas EPTly deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for direct dimensions reduction of tires into cleanly lower tire chips, dimension 50×50 mm. Cutting shafts for the manufacturing of larger tire chips are obtainable large torque at lower speed cut even the strongest tires into pieces.
All building characteristics are designed for steady procedure in orEPTto achieve greatest throughput rates at least expensive expenses.
Extremely exact tolerances between the reducing knives create cleanly lower tire chips at reduced energy consumption.
The chopping knives produced of high good quality alloy metal can be re-sharpened and reused which will increase the support life and minimizes the working expenses.
The complete chopping chamber is lined with difficult use plates.
Big doorways allow for effortless accessibility into the chopping chamber.
Tire cracker

The shear in between the two rollers will make tire chips into powders as nicely loosen rubbers, steels and textiles
Roller entire body produced of cast steel
Surface of roller made of alloy metal, welded when worn out
One particular flat floor roller and one teethed roller, substantial throughput of powders
Base created of cast iron
Crisis quit when overload
Distance amongst the two rollers can be adjusted.
Hard gear EPT
Geared up with screening EPT, magnetic separator and fiber separator, ninety nine% purified rubbers will be acquired.
Finals: 8-thirty mesh
Magnetic separator

Ultimate Merchandise(five-a hundred and twenty mesh tyre powder), As picture:
The exact same time, Tyre powEPTis extensively use in many market. It can make rubber tile, reclaimed rubber, auto component Ect other folks.

2-Reclaimed rubber Generating Line From Tyre Powder:

1. Dynamic desulfurization tank (1 sets

Item Name
Dynamic desulfurization tank
Model specifications

2. Open miXiHu (West Lake) Dis.ng mill (you need two-three sets)

1. Diameter of roller: 450mm

2. Working duration of roller: 1200mm

three. Velocity of front roller: 24.26m/min

4. Friction ration of two rollers: 1: 1.27

five. Max hole: 15mm

six. Capacity: twenty five-50kgs

seven. Wieght: 2000kgs

8. Motor EPT: 55KW

nine. Dimension: 6150*2280*2000mm

three. Rubber refiner( 1 sets)

1. Entrance rolle diameter: 480mm (drum )

2. Rear roller diameter: 612mm (drum)

three. Operating length of roller: 800 mm

four. Front roller linear speed: 22.97m/min

five. Pace ratio of 2 rollers(entrance/rear): one: 1.82

6. MAX Hole: 15mm

seven. Motor EPT: 55KW

eight. Dimension: 4700*2100*1480mm

Final EPT(RECLAIMED EPT):

No Title model quantity EPT
EPT tire pre-processing , you will get lt fifty*50MM rubber crumb
one Solitary hook debeader LS-1200 1 11 KW
two EPT tyre cutter WTC-one hundred twenty one 5.5 KW
three/four EPT tyre shredder( with EPT tyre conveyor) ZPS900 one sixty one.five KW
Rubber powder processing: you will get 3-eight MM rubber powder,at the identical time, different the fiber and steel wire
five Tyre crusher XK560 1 75 KW
six Massive conveyor gear BCL-eight two two KW
seven Small conveyor equipment BCL-3 1 1.1 KW
8 Huge Magnet separator BMS22 one two.two KW
nine Little Magnet separator SMS-1 1 1.one KW
10 Massive Shaking screen BSS-eight one seven.five KW
eleven Modest Shaking screen SSS-three 1 3 KW
12 Fiber separator FS110 one eleven KW
thirteen Fantastic grinder XMF420 1 32.four kw
fourteen Circle shaking monitor DIA600 1 2.2 kw

Good Tire Recycling Machine Suppliers   Rubber Powder Making Machine   Waste Tire Scrap Recycling Machine

Good Tire Recycling Machine Suppliers   Rubber Powder Making Machine   Waste Tire Scrap Recycling Machine

Good Tire Recycling Cutting Shredder Crushing Machine Into Rubber Powder Making Line

Good Tire Recycling Cutting Shredder Crushing Machine Into Rubber Powder Making Line

Automatic tire recycling EPT/tyre shredEPTEPT

Tire debeader

The first step in tire recycling procession
Weighty obligation body
Hooks and cross pulling die made of forty five# steel, tempered and quenched
Geared up with protection body steering clear of the risks for the duration of working
Two collection: Hydraulic a single and mechanic 1
Simple to run and modify spare parts (hooks and cross pulling die)
Tire cutter

Cutting tires into parts prior to shredding
Modest tire pieces are less difficult to procedure in shredder
Knives manufactured of YG-20 steel, EPT using time
Hydraulic management
1 clamping cylinEPTand one particular chopping cylinder
Geared up with a roller platform to procedure huge tires
Tire shredder

The substantial-ability shredEPTwas EPTly deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for direct measurement reduction of tires into cleanly cut tire chips, measurement 50×50 mm. Reducing shafts for the creation of more substantial tire chips are obtainable high torque at lower speed lower even the strongest tires into pieces.
All design attributes are developed for ongoing procedure in orEPTto attain greatest throughput prices at lowest costs.
Incredibly exact tolerances in between the reducing knives generate cleanly minimize tire chips at reduced strength consumption.
The chopping knives produced of large top quality alloy steel can be re-sharpened and reused which boosts the provider life and reduces the operating fees.
The full cutting chamber is lined with tough dress in plates.
Large doorways permit for straightforward access into the cutting chamber.
Tire cracker

The shear between the two rollers will make tire chips into powders as nicely loosen rubbers, steels and textiles
Roller physique created of cast steel
Surface of roller produced of alloy metal, welded when worn out
A single flat floor roller and one particular teethed roller, large throughput of powders
Base created of forged iron
Unexpected emergency cease when overload
Distance amongst the two rollers can be adjusted.
Tough equipment EPT
Outfitted with screening EPT, magnetic separator and fiber separator, 99% purified rubbers will be received.
Finals: eight-thirty mesh
Magnetic separator

Ultimate Solution(5-one hundred twenty mesh tyre powder), As image:
The very same time, Tyre powEPTis extensively use in several market. It can make rubber tile, reclaimed rubber, car portion Ect other individuals.

2-Reclaimed rubber Producing Line From Tyre Powder:

one. Dynamic desulfurization tank (1 sets

Item Identify
Dynamic desulfurization tank
Design specs

two. Open miXiHu (West Lake) Dis.ng mill (you need 2-three sets)

one. Diameter of roller: 450mm

2. Working duration of roller: 1200mm

three. Pace of front roller: 24.26m/min

4. Friction ration of two rollers: one: one.27

5. Max hole: 15mm

6. Capability: 25-50kgs

7. Wieght: 2000kgs

eight. Motor EPT: 55KW

9. Dimension: 6150*2280*2000mm

3. Rubber refiner( 1 sets)

one. Front rolle diameter: 480mm (drum )

2. Rear roller diameter: 612mm (drum)

three. Functioning length of roller: 800 mm

4. Entrance roller linear pace: 22.97m/min

five. Speed ratio of 2 rollers(entrance/rear): one: 1.82

6. MAX Hole: 15mm

7. Motor EPT: 55KW

8. Dimension: 4700*2100*1480mm

Ultimate EPT(RECLAIMED EPT):

No Title model quantity EPT
EPT tire pre-processing , you will get lt 50*50MM rubber crumb
1 Solitary hook debeader LS-1200 one 11 KW
two EPT tyre cutter WTC-one hundred twenty 1 5.five KW
3/four EPT tyre shredder( with EPT tyre conveyor) ZPS900 one sixty one.five KW
Rubber powder processing: you will get 3-eight MM rubber powder,at the same time, independent the fiber and metal wire
five Tyre crusher XK560 one seventy five KW
6 Big conveyor tools BCL-8 2 2 KW
seven Little conveyor products BCL-three one one.1 KW
eight Big Magnet separator BMS22 1 two.two KW
9 Tiny Magnet separator SMS-1 one 1.1 KW
ten Big Shaking screen BSS-8 one 7.five KW
eleven Small Shaking display SSS-3 one 3 KW
twelve Fiber separator FS110 one 11 KW
13 Fine grinder XMF420 one 32.4 kw
fourteen Circle shaking display DIA600 one 2.2 kw

Good Tire Recycling Cutting Shredder Crushing Machine Into Rubber Powder Making Line

Good Tire Recycling Cutting Shredder Crushing Machine Into Rubber Powder Making Line

Waste Tire Recycling Scrap Rubber Crusher Machine Rubber Powder Tiles Making Equipment

Waste Tire Recycling Scrap Rubber Crusher Machine Rubber Powder Tiles Making Equipment

Waste Tire Recycling Scrap Rubber Crusher EPT/Rubber PowEPTTiles Producing Equipment

1.Major operating approach

2.Tire Debeader ( oil hydraulic type)

Product: LS-1200

Potential:twenty-forty tires/hour

Pulling power(T): thirteen

Max.tire diameter 1200mm

EPT(KW): 11KW

Stroke distance: 1300mm

Dimension(L*W*H): three.six*.78*1.02

Weight: 2500KG

three.EPT tire cutter

Product :WTC1200

Ability:twenty-40 tyres/h

Motor EPT:5.5kw

Tire range:Max 1200mm

Dimension:2080*1000*2130mm

4.EPT tyre shredder

Design

ZPS-900

ZPS-1200

Generation capability

one.five-2 Ton/hour

three.five-4Ton/h

Dimensions of feeding

le900 mm EPT tyre

le1200 mm EPT tyre

Discharging particles

le50*50mm

le60*60mm

Motor powder

sixty kw

one hundred ten kw

Discharging motor

2.two kw

four kw

Cutter rotate velocity

sixteen r/min

31 r/min

Screener rotate velocity

six r/min

eight r/min

Dimension (L*W*H)

three.5*2.4*two.4 m

4.five*3.2*three.five m

Bodyweight

eight.two Ton

13.5 Ton

Information :

Knives substance: H3 , Germany stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd, cast, heat therapy by substantial frequency, some manufacturing facility only use 45# metal, the Value is much more more affordable(only 1/three of H3 ), but the daily life is a lot more shorter! The existence of the knives is the most EPTant for the shredder EPT.

5.Tire crusher

Type

XKP-four hundred

XKP-450

XKP-560

Entrance roll diameter(mm)

400

450

560

Rear roll diameter (mm)

four hundred(grove roller)

450 (grove roller)

510 (grove roller)

Working length of rolls(mm)

600

650

800

Front roll floor speed(m/min)

17.32

23.2

25.56

Friction ratio

one:one.38

one:1.38

1:one.30

Max.nip(mm)

8

8

fifteen

Manufacturing potential(kg/h)

two hundred-300

600-800

-1500

Motor EPT(kw)

forty five

55

seventy five

All round dimension(mm)

3950*1800*1780

4770*1846*1835

5064*2284*1978

Weight(kg)

7000

12000

18000

6.Big conveyor belt

seven.Magnet separator

8.Fiber separator

Capability:five hundred-1000kg/h

Motor EPT:five.5*2+.seventy five kw

Dimension:1.five*one.five*three.4(m)

Excess weight:about one.5Ton

9.Rubber grinder

ten.EPTs mounted in our workshop now

11.EPTs installed in our workshop now


twelve.Loading the container

Waste Tire Recycling Scrap Rubber Crusher Machine Rubber Powder Tiles Making Equipment

Waste Tire Recycling Scrap Rubber Crusher Machine Rubber Powder Tiles Making Equipment

Used Tire Recycling Machine for Making Rubber Powder

Used Tire Recycling Machine for Making Rubber Powder

Utilised tire recycling EPT for producing rubber powder

1. Product INTRODUCTION

1-1. Standard introduction of Utilized tire recycling EPT for creating rubber powder.

one.Solitary Hook DebeaEPTLSJ-1200

Structural characteristics

The blade of cutter is manufactured of alloy welding and the area is tough use-resisting.
On basic safety aspect, this EPT have protective body, which can successfully promise safety in the process of pulling out wire loop.
Motor and EPT, and as a EPT, the construction is compact.
The EPT occupies the EPT ground, handy installation.

Use: Pulling out the wire loops from the mouth of waste tires.

two. Tire Cutter QDJ-1200

The standard principle is: motor drives hydraulic method and the cylinder, location the tire to lock arm, fasten two blades rotating in between tire and shear cylinders work to go, two blades rotating blades forming shear, attain the impact of shear.

Function:

This gear, good shear result, shearing pace, lower strength consumption, tiny volume, convenient, because use the hydraulic system, effortless operation and risk-free.
Mechanical description: the tires far more than 800 need to reduce, and lower into 4 parts in EPT .the size of piece is 200-500mm.

Notes for using tire cutter:

a. Examine the knives often, if seem obvious blunt, it should be maintain well timed, and the service is two-3 several years.
b. the oil in hydraulic station ought to be filtered and altered frequently. EPTly filter when every one particular and half 12 months.
c. Sporting components: rubber seals, delivered with one more established when ship the EPT to the customer.

3 amp4. EPT tire shredEPTZPS-900

Use:

This EPT can right crush tires more compact than 800mm tires. At the EPT temperature, can be put directly crushed into fifty * fifty mm block, so the next rotating can grind into 10-thirty meshes or wire and fiber separation equipment.

Attribute:

This EPT is a compact composition, superior technology, reduced energy use, substantial efficiency, smashing off the examination area for the construction, maintenance is specifically hassle-free equipment with carbide surfacing technologies, large hardness, large wear resistance, and recurring restore utilizing, so has a EPTer services daily life rotary display for the lattice structure of steel mesh, blanking massive spot, enabling the screening of competent rubber. Soon after the partition of large tires can obtain the result of the same!
Mechanical description: the tires of 800mm diameter and rubber ring can straight be broken into 50*50 mm of rubber block.

Notes for using EPT tire shredder:

a. Inject gear oil into EPT oil (hypoid equipment oil), principal bearings use calcium-dependent grease lubrication, a few months soon after the procedure of the EPT, the oil ought to be replaced and clear the gasoline tank. Because then change the oil when time every single calendar year.
b Right after deal with 3,000 tons of squander rubber (in regular situations),the consumer need to grind the blade chopping edge after time. The blades is the use areas, the EPT service life is five-six a long time, when offering the EPT to the customer, the shredEPTwill be geared up with edge hardness layer patching substance (electrodes).

five. Double Rolls Rubber Crusher XKP-560

Use:Largely employed for crack massive rubber blocks into forty-50mm tiny rubber blocks.

Technical parameters:

Construction: The rollers undertake alloy chilly challenging solid irons with dress in-resisting, sturdy figures. The mill flour is with tooth, high groove.

In orEPTto lengthen the support lifestyle of the cracker, we suggest construct foundations for rubber cracker.
The configurations of our XKP-560 rubber cracker are nylon bush grease lubrication and difficult equipment area EPT with decrease sounds and EPTer support daily life.

Our crackers are developed XiHu (West Lake) Dis.Hu (West Lake) Dis.nized with great working platforms, all the wires will be related well from controlling method to motor. When utilizing the EPT, the clients just require to link straight to the EPT.

1-two. Attributes of Utilized tire recycling EPT for creating rubber powder.

FOR More Information : WWW.OULI-EPT.COM

1-3. Parameter of Utilised tire recycling EPT for producing rubber powder.

Single hook Tire wire drawing EPT Double hook Tire wire drawing EPT
Potential (tires/h) 40-sixty Capacity (tires/h) sixty-a hundred and twenty
Adapt tire dimension (mm) le 1200 Adapt tire measurement (mm) le 1200
PowEPT(kw) eleven PowEPT(kw) 15
Pulling pressure (T) fifteen Pulling force (T) 30
Dimension (mm) 3890 times1850 times3640 Dimensions (mm) 2250 times1650 times1500
WeigEPT (T) 2.eight WeigEPT (T) 6

Tire Chopping EPT
Parameter/model TC-300
Ability (tires/h) forty-sixty
Adapt tire measurement (mm) le 1200
PowEPT(kw) five.five
Dimension (mm) 2571 times1090 times1700
WeigEPT (T) 1.2

Tire shredder
Parameter/model ZPS-900 ZPS-1200
Adopt tire (mm) le 900 le 1200
Output block dimension (mm) 50 times50 50 times50
EPT (kw) 22 times2 55 times2
Capacity (kg/h) 1500-2000 3000
Measurement (mm) 3800 times2030 times3300 4100 times2730 times3300
WeigEPT (kg) 6000 16000

Rubber crusher EPT
Parameter/design XKP-400 XKP-450 XKP-560
Front Roll diameter(mm) four hundred 450 560
Back again Roll diameter (mm) four hundred 450 510
Roll functioning duration(mm) 600 800 800
Roll ratio 1:one.237 1:1.38 1:one.3
Front roll velocity (m/min) seventeen.32 23.2 25.six
Altering nip assortment(mm) -ten -10 -fifteen
Motor EPT (kw) 37 55 a hundred and ten
All round dimensions (mm) 3950 times1800 times1780 4770 times1846 times1835 4750 times2300 times2000
WeigEPT (t) eight twelve twenty

one-4. Sample photographs of Used tire recycling EPT for generating rubber powder.

two . Business Data

2-one OULI Business

EstabEPTd in 1997 , HangZhou Ouli EPT CO., LTD was found in XiHu (West Lake) Dis.hu (West Lake) Dis. District, the west coastline of HangZhou city,ZheEPTng province ,China.

Branches in HangZhou , HangZhou and so forth ended up developed in 2012 and 2015 .

We are EPTized in rubber EPTry developing,manufacturing and maintenance operates

OULI primary goods:
Rubber miXiHu (West Lake) Dis.ng tools / Rubber vulcanizing EPT / Computerized and semi-automatic waste tire recycling products / Rubber calendaring EPT / Rubber extruding equipment / Reclaimed rubber manufacturing line

Our EPTs have been exported to far more than twenty nations this kind of as The usa, Canada, Australia, Southeast Asia, Center East,Brazil .

We warmly welcome customers check out manufacturing unit and technological innovation discussion is extremely appreciated .

two-two OULI workshop

three. Buyer Suggestions

4. EXHIBITION

5. Bundle AND Delivery

six. FAQ

Q1:Why decide on Us?

1.More than twenty several years history of OULI EPT manufacturing unit.

6-eight several years international product sales experience personnel, far more effectiveness and specialist.

Engineers oversea services much more than 20 nations .

two.ISO:9001,CE,BV certification approval

3.Support well timed, Promise to give remedy within twelve hours,Ensure client problems free.

four.Short delivery day, No delay. Accept urgent orEPTfor prompt shipment.

Q2:What about shipping date?

It will be in accordance to the amount of EPTs. Normally EPTs will be cargo within twenty-thirty daEPTafter get deposit, No hold off.

Acknowledge urgent orEPTfor prompt shipment.

Q3:What’s the guarantee assertion?

OULI EPT warrants all the goods created by OULI EPT to cost-free from defects in material and workmanship UnEPTnormal use of a interval of 12 months or 36months right after the date of the authentic purchase value if fix or substitute is not achievable of useful, OULI EPT warranty addresses ONLY the item itself.

OULI EPT will presume no legal responsibility for labor charges, installation charges, or other losses.

Your guarantee legal rights will be honored

Only when the item has been put in and used appropriately as considered by OULI EPT,OULIEPT will not mend items ruined by improper use or faulty set up.

This autumn:What about OULI oversea provider ?

OULI will set up oversea placing up and coaching functions if buyer need to have .

Client must pay for lodging , tickets and income .

In the meantime OULI has branches in diverse areas like north The us , Southeast Asia , Brazil and many others , etc .

Utilized tire recycling EPT for creating rubber powder.

Used Tire Recycling Machine for Making Rubber Powder

Used Tire Recycling Machine for Making Rubber Powder