High Range Soundless Cracking Agent Non Explosive Expansive Mortar

High Range Soundless Cracking Agent Non Explosive Expansive Mortar

What’s CRACK AGENT / Expansive Mortar?

CRACK AGENT (Expansive Mortar) is a type of powEPTwith incredible 18,000 PSI expansive energy when combined with typical drinking water. Poured into holes, CRACK AGENT breaks bolstered concrete amp rock safely and securely and quietly, whilst supplying SILENT cracking. Since CRACK AGENT supplies controlled demolition in accordance to drilling styles, it is quite effortless to break reinforcedconcrete and all sorts of stone into sought after dimensions and shapes, with out sound, vibration or dust.

In demolition, concrete reducing amp excavating sector, CRACK AGENT assists you to break strengthened concrete and rock into chunks, so you might simply minimize off rebar, haul it absent with a crane or truck without harm remaining portion.

In mining and quarrying industry, CRACK AGENT helps to attain ideal slabs and blocks from limestone, onyx, marble, granite or any other type of stone you are functioning with. Compares to blasting, CRACK AGENT avoids waste of beneficial stone, high insurance, costly storage and labor. CRACK AGENT can also be applied aEPT with traditional strategies like primer wire, hydraulic breaker, diamond blade noticed and jackhammer to aid lower cost, operate time and improve security, In addition silent procedure, CRACK AGENT is best for residential, faculty and airport location. CRACK AGENT aids your function to become much more effective and value powerful.

Depending on different functioning temperature, there are 4 types of crack agent for your decision.

How to use


1. Drill holes making use of an air hammer drill and appropriate drill bit certain to the rock kind.

2. Holes must be drilled no more than thirty-60cm (1ft-2ft) apart. Observe: In strengthened concrete advised no a lot more than 20cm (eight quot) aside.

3. Advised gap diameter 38mm – 50mm (1 frac12 quot – two. quot). Depth would be 70-ninety% of the way based on the type of rock/substance to be taken off.

MiXiHu (West Lake) Dis.ng

one. For standard basic safety causes and miXiHu (West Lake) Dis.ng modest amounts by hand, it is suggested to use rubber gloves.

two. In a bucket, merge one.five Liters of h2o to one 5kgs bag of CRACK AGENT. Or pour water and CRACK AGENT as a rate of one:three units by fat.

3. Combine effectively, using a drill and paddle is recommended. If miXiHu (West Lake) Dis.ng with a adhere or other approach, make sure powEPTis totally dissolved into the water. Blend to a slurry.


1. Thoroughly clean holes just before filling making use of air hose eliminate surplus dust from drilling.

two. CRACK AGENT slurry should be poured into holes inside ten-15 min. after miXiHu (West Lake) Dis.ng. Do not fill to the leading, only fill the holes about 15mm ( frac12 quot to one quot) from the prime.

three. Mix nicely and pour into holes although agitating the hole to make certain no air gaps are in the hole. Case in point: Employing a piece of rod or adhere to poke holes.

4. For Horizontal holes, a grouting pump would be most reputable to poor.


The cracks appear in forty-60 min. right after filling, dependent on the weather,rocks, and concrete sort. The cracks turn into wiEPTwithin time (maXiHu (West Lake) Dis.mun 48 hours expXiHu (West Lake) Dis.Hu (West Lake) Dis. time).



1. Amazing Expansive Capability

Incredible eighteen,000 PSI expansive energy when blended with frequent drinking water.

2. Straightforward to use

No official instruction necessary prior to use. Just blend with h2o and then fill into holes. Once combined with thoroughly clean water, CRACK AGENT can be poured into holes pre-drilled in the material you are functioning with It can be poured into the very same holes that unsafe explosives are typically positioned in.

three. Non-Explosive amp Environmentally Welcoming

An substitute to blasting, diamond blade observed, hydraulic breaker and jackhammer, which is safer, much more efficient, performs without sounds, vibration, dust by providing silent expansive cracking.

4. Performs Efficiently and Expense Successfully

No Unique License, training or gear essential.


one. Initial stage: 5kg in plastic bag
2. Next step: four plastic baggage in one carton
three. 3rd stage: 50-sixty cartons on every wooden or plastic pallet.


  • Well created hole drilling sample will decrease use of CRACK AGENT by reducing into preferred measurements.

  • To insure good results, CRACK AGENT requirements Free Area to increase to.

  • For better outcomes, it is EPTant to observe equally air and content temperature. Material temperature is the temperature inside of the rock or concrete which can be different from the air temperature.

  • In summertime, the ideal time to use CRACK AGENT is in the evening when substance temperature is amazing.

  • In summer season, go over holes from direct sunligEPT to avoid blow-out. Example: utilizing a tarp or moist hay to supply shade.

  • If CRACK AGENT entirely dries into powEPTand did NOT crack, pour further h2o on to CRACK AGENT loaded holes.

  • When employing CRACK AGENT on hugely absorbent components like concrete, the holes need to be dampened just before the mortar is poured, making positive nonetheless, that there is no existence of h2o.

  • New mortar need to be poured into holes within five minutes after miXiHu (West Lake) Dis.ng.

  • The workers require to get synchronized operation, eEPTly to tough stone. The amount of holes each worker responsible to fill has to be average. EPTking synchronized steps when miXiHu (West Lake) Dis.ng, stirring and filling will direct to maXiHu (West Lake) Dis.mum expansive stress with all holes increase at the very same time.

  • When miXiHu (West Lake) Dis.ng, if CRACK AGENT commences to steam in container, incorporate some water to dilute and procedure correctly.

EPT Precautions

#8226Make sure that everybody working with CRACK AGENT understands the chance of blowouts, and has read the technological guidelines extensively.

#8226CRACK AGENT is a extremely alkaline item, pH reaches 13 following contact with water and can trigger severe irritation to mucous membranes, eEPTly eyes. Pores and skin and eye contacts with CRACK AGENT need to be rinsed off with big quantities of chilly drinking water quickly with no rubbing. Consult a physician rapidly.

#8226Wear safety goggles and rubber gloves in the course of CRACK AGENT handling, miXiHu (West Lake) Dis.ng and filling. Dust-evidence mask is recommended in improperly ventilated locations such as tunnels or mines.

#8226Plug the holes immediately right after filling and include the holes with straw mat. Keep your confront absent from the holes loaded by mortar. Continue to be absent from loaded holes at minimum 3 several hours after filling to stay away from blow-out shot. Maintain people away from job internet site following filling .

#8226Warm or bubbling mortar is forbidden to fill into holes. When filled holes start off to smoke or steam, that is the indicator they may be about to blow out. Distinct the location of individuals immediately.

#8226Keep people away from jobsite right after filling holes. In scenario of men and women have to continue being in the area, cover loaded holes with a tarpaulin.

#8226EPTke treatment of slide of cracked block from the cracking object.

High Range Soundless Cracking Agent Non Explosive Expansive Mortar

High Range Soundless Cracking Agent Non Explosive Expansive Mortar