Sticky Sublimation Coating Powder
Sticky sublimation coating powEPTis particularly made and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for the elastic material transfer printing, to avoid the overlap of the sample, deformation and other troubles of elastic fabric in the procedure of transfer, ensuing in a very lower move price of transfer printing
one.During the transferring , the sticky coating powEPTcould be ready to adhere the cloth and paper, but there is no glue residue on the fabric after stripping
2.The stickiness of the material and paper can be adjusted by the manufacturer of the transfer paper unEPTthe advice of our organization and the viscosity is much more secure, which can be saved for a EPT time.
Substantial Focus Sublimation Coating Powder
For the existing high-pace coating EPTs, our organization independently deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s a strong content of much more than thirty% of the coating chemical-large concentration coating powder. On the foundation of no rising in costs, the coating speed could be signnificantly enhanced, and generation capacity will be doubled than the fast-dry coating powders.
For higher-velocity coating EPT generation, coating manufacturer ought to have a mature coating technological innovation.
Quickly-dry Sublimation Coating Powder
The formulation of the 1st era of EPT sublimation transfer paper coating is commonly utilised in the marketplace, but progressively it cann’t be matched with the prerequisite of substantial-velocity printer due to the higher value, minimal production efficiency and sluggish drying of printing coating.
Nano-induced secondary self-assembly techniques of this coating content , are greatly enhanced in the subsequent elements:
one.The general expense of this rapidly-dry mixed powEPTis decreased while the usability of the powEPTremains unchanged
2.This rapidly-dry coating powEPTcan improve the performance of coating production, and the manufacturing speed can be promoted by far more than 25%
3.Owing to purposeful enhancement, the printing drying price of this solution has been enhanced a lot more than one time, and it can save massive quantity of electric powered powEPTfrom the baking lamp.
How to use our coating powder:
1.Introducing proportional drinking water into stirring tank, hold drinking water temperature as same as space temperature.
2.Place EPT bag coating powEPTslowly into agitator whilst stirring, and preserve stirring till the chemical powEPTdissolving uniformly into h2o, no lump on the surface of liquid. The dissolution time depends on the method of agitator.
three.EPTking some samples of doing tests following dissolving, and take notes of glue temperature and corresponding viscosity, make sure the competent testing outcome prior to filtration.
four.Two times of filtration just before coating on EPT with 800-100mesh filter
5.The liquid glue continue being on EPT is recyclable while coating. It must be by means of filter screen yet again and can be utilised in miXiHu (West Lake) Dis.ng with refreshing liquid coating chemicals.
Million-ton EPT Content(HangZhou) Co., LTD